 About Fluted Display Board
Fluted display board is a twinwall polypropylene sheet that is lightweight and cost-effective, ideally suited for a wide variety of indoor and short-term outdoor uses. Typical applications include the following signage:
|
- For sales signs
- Special event signage
- Directional and informational signage
- Industrial
|
- Indoor point-of-sale
- Temporary signage
- Low-cost signage
- Exhibitions
|
Fluted Display Board - What is it?
Fluted display board, is also known as corrugated plastic and by the brand name Correx®, is an extremely versatile, extruded twin-wall plastic sheet. It is durable and can be cut to create collapsible signage. Fluted display board is an excellent substitute for poster board or card stock for interior applications. Its surface is not affected by most oils, solvents or water, and cleans easily.
Fluted display board is aligned with flutes that generally run horizontally across the width of the sign. There is a slight detection of lines when looking at the material.
By cutting through the first corrugation only, you can create A-frame signs or table tent signs. The cut will also allow the sign to be folded and carried in a briefcase or suitcase.
Sizes
Fluted display board is available in a variety of lengths, widths and thicknesses, the most commonly stocked sheets are 1000 x 1230mm and 1220 x 2440mm.
Thickness
The stocked thickness of fluted display board is 3mm for single sided signs and 6mm for double sided signs.
Value-Enhancing
There are several ways you can increase the value and effectiveness of your fluted display board signs:
- Adding striping and/or borders
- Using additional lettering colours
- Displaying on cardboard easel
- Adding a logo
- Using a graphic symbol
- Using frames or stakes
Installation and Display
Fluted display board signage may be displayed in many ways, including the following:
- Hanging
- Self-supporting (with a cardboard easel)
- Suction cups
- Double-sided tape
- Velcro®
- Framed and/or staked
|